Select Page
or use: BOM Uploader

Home » Products » Passive & Discrete » Amplifiers » Semtech TS13401M

Semtech TS13401M

Category: Tag:

Semtech TS13401M – Neo-Iso™ Solid State Relay Driver with Sensing and Power Transfer

The TS13401M is a galvanically isolated 60V power FET driver with bi-directional blocking. The state of the switch and other product features are controlled by sending commands on the CLK input.
The TS13401M supports several sensing modes where the switch state, load current, supply voltage and device temperature can be sampled. The digitized measurements can be read back from the device on the DATA pin when requested on the CLK pin. In addition, TS13401M supports power transfer from the system’s AC supply to the low-voltage controller
domain.
The TS13401M includes several protection features. The switch will open in self protection if current exceeds the over-current limit or if the device temperature limit is exceeded. The switch will remain open until a new turn on sequence is given through CLK.

Semtech TS13401M

Category: Tag:

  • Low Quiescent Operating Currents
  • – 15μA in ON state – 2mA in Sensing Mode

  • Switch to controller scalable galvanic isolation
  • Single control signal for input commands
  • – Microcontroller-compatible levels

  • Switch Characteristics
  • – Bi-directional blocking in OFF state – Up to 60V FETs supported – Up to 10A current during inrush – and 5A continuous operation

  • Operating Modes
  • – Zero-cross ON / OFF – Immediate ON / OFF – Dithering Mode for system power sharing – Switch state polling

  • Sensing Modes for system data acquisition
Semtech TS13401M Datasheet

 

Always refer to the manufacturer's original and most recent product documentation. Astute accepts no responsibility for inaccuracies in product data or specifications.